Red Guardian

Red Copper Guardian

The Red Copper Guardian is composed of a pure copper housing. Copper has a hardness of approximately 3.5 and can be easily damaged when dropped. The surface requires constant care and cleaning to prevent oxidation.

Buyer Attention: 

This product is non-refundable unless the fault is a manufacturing defect related to the laser diode or operation of the laser.

Laser Function

How to Power the Laser On

The Guardian is powered by one 18350 unprotected lithium battery. Insert the battery with the positive side going in first. Next, screw on the base cap and press the power button to operate the laser.

Single-Operation Mode & Multi-Operation Mode

Single-operation mode lasers runs in full power mode only.

Multi-Operation mode lasers has five unique settings with an additional electronic safety lock function.

The five unique operational modes cycle in the below order:

Low Power > Half Power > Strobe > Full Power > Emergency SOS > and back to Low Power

How to Access the Multi-Operation Functions

Half-press the button once to enter the next operational mode.

Electronic Safety Lock(Multi mode only)

To prevent unauthorized use, half-press the button three times within the first three seconds immediately after the laser light is visible. The laser should switch to strobe mode before entering the safety lock(dim laser dot).

Unlocking the Laser

Power on the laser and wait one second. Next, half-press the button five times within three seconds and then wait another 2 seconds. The laser should now switch to strobe mode indicating that the laser is unlocked.

Memory Function

The laser memorizes the operational mode last used for more than five seconds. This feature allows you to start the laser into the last operating mode without entering the button sequence pattern.

Adjustable Focus

The Guardian laser has a fully adjustable focus. Just twist the attack head located at the top of the laser to adjust the beams focus.

Battery Protection

Our lasers come with several battery protections to protect the laser and the battery: over-discharge protection, over-charge protection and reverse polarity protection.