Line Lens Insert the line lens under the steel cap to project a wide flat beam. Cross Lens Insert the cross lens under the steel cap to project a cross + beam. These lenses have to be used simultaneously with the stainless-steel attack cap(purchase differently).

800mAh 14500 li-ion battery protected Battery Specifications: 14500 (diameter 14 mm, length 50 mm) Battery capacity: 800mAH Rated voltage: 3.7VDC Charge voltage: the maximum limit of 4.2VDC Weight: 19g

TRUSTFIRE 10440 protected li-ion battery Battery Specifications: 10440 (diameter 10 mm, length 46 mm) Battery capacity: 350mAH Rated voltage: 3.7VDC Charge voltage: the maximum limit of 4.2VDC Weight: 9g

AW 18350 lithium battery Battery Specifications: 18350 (diameter 18 mm, length 35 mm) Battery capacity: 900mAh Rated voltage: 3.7VDC Maximum voltage: 4.2VDC Weight: 22g Reminder: Battery is unprotected, do not over discharge the battery completely and at least charge once every six months to avoid damage...

3-element lens (Cleanest beam profile, best for low power lasers) 3-element lens has a long focal length, low divergence and clean beam profile Advantage Tight laser beam with the cleanest beam profile Downsides 70% efficiency (1W raw output from the laser diode would be down to 700mw) G2 lens(best for...

3300Mah 18650 Li-ion battery protected Battery Specifications: Protected 18650 (diameter 18 mm, length 70 mm) Unprotected 18650 (diameter 18 mm, length 65 mm) Battery capacity: 3400mAH Rated voltage: 3.7VDC Charge voltage: the maximum limit of 4.2VDC Weight: 46g / 48g

Striker Series Adapter The Striker and Striker Saber requires the stainless-steel adapter to use the following accessories: x3 beam expander Saber attachment Pattern caps Silver, Challenger, Guardian and Ranger series do not require any adapter to use the accessories mentioned above but we recommend...

Dual channels & Single slot Li-ion Battery charger made by SANWU Fast charging, Easy to use, high quality battery charger Our li-ion battery charger consists of two parts: a 5V wall adapter and the charging base. Charging process stops automatically if the li-ion batteries are fully charged to prevent...

Stainless steel attack caps Fits perfectly on the silver, guardian and challenger lasers. For striker & striker saber, you must install the stainless steel adapter before mounting the attack heads. Other Usage of the stainless steel cap: Insert a small piece of line or cross effect lens under the steel...

Laser tripod compatible with all our laser series except pocket series. Very easy to assemble and adjust the direction.

Tritium Vials imported from Switzerland Please read before order To match the NRC requirements. US Persons are required to have a license authorizing the possession and use of radioactive material issued in accordance with the regulations of 10 CFR. US Orders that fail to provide such a license will...

KINGKONG 18350 lithium battery Battery Specifications: 26650 (diameter 26 mm, length 68 mm) Battery capacity: 4000mAH Rated voltage: 3.7VDC Charge voltage: the maximum limit of 4.2VDC Weight: 22g Reminder: Battery is unprotected, do not over discharge the battery completely and charge the battery from...

What is the OD Level? The higher the OD level, the better. The higher OD levels offer more protection for your eyes. For example, if you point a 7-watt laser directly at OD 3 laser googles, there will be seven milliwatts of the laser beam passing through the goggles and 0.07 milliwatts for a OD5+ laser...

Product Info: Made from 100% acryli c Lightsaber attachment size: W:12mm x L:41cm Can be used with these adapters The Saber attachment is an excellent tool that enhances the sophistication and fun of your laser! Notice: This attachment is compatible with all our lasers, laser pointers except the Pocket...

New release! Electric auto-spinning adapter, displays amazing stars and laser effects with only a press of a button . Product Specs: Housing Aluminium, Black Battery life 20 minutes Power supply USB rechargeable Output limit Weight 21.5g, 0.75 ounces Normal attachable Star caps Enjoy next level laser...

X3 Beam Expander The X3 beam expander is explicitly made for our handheld lasers. A beam expander is a set of lenses which reduces the beam size over long distances by expanding the beam at aperture since laser beams do expand over long distances and loses its brightness as far as the beam travels. Our...

The flashlight converter is explicitly made for our blue lasers(445nm - 470nm). It converts the blue laser beam into a pure white flashlight beam with adjustable beam throw.